即時估價詢問
會員名稱
Mail
聯絡方式
所在地區
驗證碼

詢問事項
  • 圖
  • 圖
觀看人數:13,208人

 

鐵罐鐵皮印刷種類

各種鐵皮印刷/馬口鐵印刷/茶葉罐/汽車蠟罐/油漆罐/沙茶罐/儲蓄筒/彩色筆盒. /飲料罐/咖啡罐/餅乾盒/筆筒/光碟整理盒/金屬盒/眼鏡盒/煙盒/午餐盒/音樂盒/錶盒/鉛筆盒/糖果包裝盒/手提箱/波磁性產品/各式鐵罐印刷加工

 

 漢斯印刷專員黃先生手機  0910-243496 Line:0910243496 我們加了才看到妳的資訊  公司業務專員許小姐電話:02-2998-2117-8專線566   han666@hanfom.com 

 Hans Feng Printing Specialist Mr. Huang Mobile 886 0910-243496 

Tel: 886 2 29982117  Tel: 886 229982118  Special 566 Miss Xu Line  Line:886  han666@hanfom.com

 

Hans International Printing Co., Ltd.
Hans Printing Specialist Mr. Huang Mobile 866 0910243496 :  http://www.hans-p-d.com.tw 
No. 66, Lane 192, Siyuan Road, Xinzhuang District, New Taipei City, Taiwan
Phone: +886 2 29982117 +886 2 29982118  566 Miss Xu Line  han666@hanfom.com
Fax: +886 2 2998-6588

 

 

Tin cans print version
Various metal printing / tinplate printing / caddy / car wax cans / paint cans / sand Chaguan/ Savings cylinder / Color Pencil. / Beverage cans / coffee cans / biscuit box / pen holder/ DVD finishing box / metal box / glasses case / cigarette / lunchbox / music box / watch box/ Pencil box / candy box / suitcase / wave magnetic products / all kinds of tin printing process

 

鐵皮印刷,是在金屬板上進行印刷,故也叫金屬印刷。一般是在鍍錫的鐵板或鋁板表面印刷圖文。
鐵皮印刷的產品,主要用于制造食品包裝盒、文具盒、兒童玩具以及室內的裝璜用品等。
鐵皮印刷,使用的是硬質的金屬承印物,極易磨損印版,所以采用平版印刷,通過橡皮滾筒轉移圖文,因此,印刷機的結構和普通印刷紙張的平版印刷機基本相同,但是,金屬板不能像紙張那樣彎曲而貼在壓印滾筒上,只能從橡皮滾筒和壓印滾筒之間水平通過。此外,鐵皮印刷的膠印機必須附設干燥系統。


Metal printing, is printed on the metal plate, it is also called metal printing. Generally in the tin-plated iron or aluminum surface of the printed graphic.Metal decorating products, mainly for the manufacture of food packaging, stationery, children's toys and interior decoration supplies.Metal decorating, use a hard metal substrates, easy to wear plate, so the use of offset printing, graphic transfer through the blanket cylinder, therefore, the structure of the press and general printing paper lithographic printing press is basically the same, however, metal board did not bend like paper attached to the impression cylinder, only from the level between the blanket cylinder and the impression cylinder through. In addition, metal offset printing drying system must be attached.

 

鐵皮印刷的工藝過程為:鐵皮處理→印刷→干燥
 一、鐵皮處理
 印刷前,用稀堿溶液或酒精,把金屬板表面的灰塵、油污等清擦干凈。
 二、印刷
 金屬板表面光滑且沒有吸收性,因此,鐵皮印刷的油墨,必須有良好的附著性,還要具有良好的耐熱、耐光、耐溶劑、耐蒸煮和耐機械沖擊力的性能。在金屬板上,一般要印刷多次,第一次印底層清漆,保護金屬不被銹蝕。第二次用白色油墨即印底層,遮蓋住金屬的顏色,然后才按照印刷色序,依次印刷圖文。最后印亮光油,保護印刷圖文。
 三、干燥
 金屬表面沒有吸收性,故每印刷一次,就需要對油墨進行干燥。干燥方式可以使用蒸氣、紅外線、電熱等。印刷品從烘干道一頭進去,另一頭出來時就完成干燥。烘干道的濕度視印刷油墨的不同而不同,一般在150~200℃之間。底層清漆的溫度需200℃,亮光油的干燥溫度約150℃。溫度過低,干燥不徹底,溫度過高,油墨變色、機械性能下降。

 

Metal printing process is as follows: metal processing printing drying

First, metal processing Before printing, dilute alkali solution or alcohol, the metal plate surface dust, oil and other wiping clean.Second, printing  Metal plate surface smooth and not absorbent, therefore, metal decorating inks, must have good adhesion, also has good heat, light performance, solvent resistance and resistance to mechanical shock cooking force.
A metal plate, usually to be printed repeatedly, first printed layer varnish to protect the metal from corrosion. The second white ink that is printed on the bottom, cover the color of the metal, and then only in accordance with the printing color sequence, followed by printing graphics. Finally, light oil seal to protect the printed graphics.

Third, dried
Metal surface is not absorbent, so each time printing, you need the ink dried. You can use the steam drying method, infrared, electric and so on. Print from one end into the drying track, while the other head out on completion of the drying. Depending on the humidity, the printing ink drying track varies, generally between 150 ~ 200 ℃. The temperature should be the underlying varnish 200 ℃, light oil drying temperature of about 150 ℃. Temperature is too low, the drying is not complete, the temperature is too high, the ink color, the mechanical
performance.

討論區
  • 我要發言
  • ※請先登入會員